Using your b.g.

When you have finished checking and preparing your b.g., put it on. Turn on the power switch, adjust the displays, and then start using your b.g.

Putting on your b.g.

Hold your b.g. with both hands and place it on your ears.

Be careful not to scratch your eyes with the ends of the frames and to not catch your fingers in the hinges.

Adjust the position of your b.g. so that the nose pad rests on your nose.

Putting on your b.g. while wearing glasses

After adjusting your glasses so that they are in the correct position, place your b.g. above your glasses.

Turning the power on and off

Your b.g. has a power switch that can be turned on and off while it is connected to a device that can supply power via USB. If you are not using your b.g., turn the power off.

The displays' projection switches between the following.

No USB connection, power off: no image

　↓

USB connection, no HDMI connection: blue screen

　↓

USB connection and HDMI connection: image appears

Adjusting your b.g.

Adjusting the focus (horizontally)

If images are blurry or you see double images, the focus needs to be adjusted. Adjust the positions (horizontally) of the displays so that their projections come into focus.

Be careful not to pull the displays forcefully or diagonally since doing so may damage them.

You can separately adjust the positions (horizontally) of the left–side and right–side displays.

Adjusting the position (up and down, forward and backward)

Adjust the positions of the displays according to what you are doing so you can see clearly. You can use the 2 hinges—hinge A and hinge B—to adjust the displays up and down or forward and backward.

Tips for adjustments

Adjust your b.g. so that the nose pad is in the center of your nose. Even if you adjust the displays, if the nose pad is off–center, images will not be in focus.
To make it easier to see, adjust your b.g. so that your eyes are as close as possible to the eyepieces.
If the projection is too bright, adjust the positions of the displays.
The position of your glasses may prevent the nose pad from resting on your nose and keeping your b.g. in place. Adjust the position of your glasses so that the nose pad rests on your nose.
The shape of your glasses may prevent the nose pad from resting on your nose and keeping your b.g. in place. If you adjust the position of your glasses and the nose pad still does not rest on your nose, try wearing contact lenses or changing to a different pair of glasses.

Do not bend the nose pad forcefully. Disregarding this precaution may cause damage.

Position the cords (cables) behind you.

Positioning the cords (cables) in front of you brings the center of gravity toward the front,your b.g. may feel uncomfortable.
You can reduce the slipping of your b.g. by positioning the cords (cables) so they go down your back, to balance the weight of the displays.

Taking off your b.g.

When taking off your b.g., hold it with both hands and remove it gently.

After using your b.g., turn off its power switch.
If your b.g. is dirty or sweaty, clean it.